From VIN 30001 Onwards

From VIN 30001 Onwards

ESCUTCHEON NUT (UD17112U)

ESCUTCHEON NUT (UD17112U)

This is a second hand escutcheon nut. Please be aware that this is a used part and the photo is for ..

17.42 €

FLOAT CHAMBER COVER (RH2901P)

FLOAT CHAMBER COVER (RH2901P)

This is a new float chamber cover for all cars from 1977 to 1987 fitted with HIF7 SU carburetters..

54.10 €

FLOAT CHAMBER FILTER (UE35892P)

FLOAT CHAMBER FILTER (UE35892P)

These are the small charcoal filters that sit in the inlet to the float chambers on all cars from 19..

13.81 €

FLOAT CHAMBER SEAL (CD5936P)

FLOAT CHAMBER SEAL (CD5936P)

This is the float chamber seal. It is suitable for all cars from 1977 (VIN 30001) up until 1987 (VIN..

3.07 €

FLOAT NEEDLE & SEAT KIT (CD6007P)

FLOAT NEEDLE & SEAT KIT (CD6007P)

This is the float chamber needle and seat kit for all cars with SU carburetters from 1965 to 1984. T..

23.30 €

FUEL FEED PIPE O RING (UD11425)

FUEL FEED PIPE O RING (UD11425)

There are two of these small O rings per carburetter so 4 per car. They should be replaced if you ar..

4.52 €

FUEL FEED PIPE O RING (UD11425P)

FUEL FEED PIPE O RING (UD11425P)

There are two of these small O rings per carburetter so 4 per car. They should be replaced if you ar..

5.30 €

GASKET (Induction T piece to carbs) (RH13076)

GASKET (Induction T piece to carbs) (RH13076)

This is the gasket and spacer assembly that goes between the Induction T piece and carbs...

68.63 €

GASKET (Induction T piece to hot idle valve housing) (RH12778)

GASKET (Induction T piece to hot idle valve housing) (RH12778)

This is the gasket between the induction T piece and the hot idle valve compensator housing...

2.95 €

Showing 10 to 18 of 64 (8 Pages)

Request a call

Leave an online application and get discount 10%

Thanks for the application!