Brake Pumps & Push Rods
3/4" ADAPTOR BRAKE PUMP (1971 onwards) (UE37285P)
This is a brake pump pipe adaptor that sits on the top of the brake pump...
47.58 €
BRAKE PIPE (Front brake pump to accumulator - later models) (UR20925P)
This is the high pressure pipe that runs from the front brake pump to the accumulator on the right h..
105.26 €
BRAKE PUMP (3/4" union on high pressure brake pipe) (UE40534HBSXR)
This is a fully reconditioned brake pump with a 3/4" (inch) union on the end of the high pressure pi..
259.20 €
BRAKE PUMP (5/16" union on high pressure brake pipe) (UE34327SXR)
This is a fully reconditioned brake pump. All of our reconditioned hydraulic units for cars from 196..
259.20 €
BRAKE PUMP BODY O RING (SPC1957P)
This is one of the two sealing rings that sit between the brake pump and its housing. There are two ..
11.28 €
BRAKE PUMP FEED HOSE (Front - up to VIN 5000, Rear - all models) (UR14202)
This is the feed hose from the brake fluid reservoir to the brake pump. There are two of these hoses..
24.28 €
BRAKE PUMP FEED PIPE O RING (UE35616P)
This is the O ring that seals the brake pump feed pipe to the inlet on the housing of the brake pump..
2.66 €
BRAKE PUMP HOUSING (From 1967 (VIN 5474 approx) to 2002) (UR27427U)
From 1967 (VIN 5474 approx) all Siilver Shadow & Bentley T models were fitted with this casing which..
150.48 €
BRAKE PUMP HOUSING (Prior to VIN 5474) (UE35160U)
This is the main housing for the brake pumps on the early models which were fitted with reservoir fe..
150.48 €