Inlet Valves
INLET TAPPET (1.190") (RE15169P)
This is a 1.19" inlet tappet for all models from 1945 to 1955. If you require a smaller diamter tapp..
77.04 €
INLET VALVE (8:1 Compression ratio) (RE22359P)
This is the inlet valve for the later 8:1 compression ratio cylinder head...
137.26 €
INLET VALVE (MkVI, R Type and 6.6:1CR S1) (OEM) (EB3853P)
This is the inlet valve for all MkVI and R Type (4.25 and 4.5 litre engine) cars and the early S1 an..
99.48 €
INLET VALVE SEAT (Standard size - 6.6:1 compression ratio) (UE351)
This is the standard size inlet valve seat...
60.84 €
INNER INLET VALVE SPRING (RE6793P)
This is the inner inlet valve spring (the smaller of the two) for MkVI (from D series) onwards...
17.57 €
LOWER INNER INLET VALVE SPRING WASHER (RE3679P)
This is the inner (cupped) washer below the inlet valve spring on all MkVI, R Type, S1 and Silver Cl..
21.60 €
MODIFIED RUBBER VALVE STEM SEAL (EB1886MODP)
This is a modern rubber valve stem seal that can be fitted instead of the original cotton seals. Ple..
16.27 €